The ninth-generation console in Microsoft’s lineup is the Xbox Series X. If you have a Series X, you might have observed that the fan continues to quietly spin even after you shut the console off. Is there an on-demand fan on the Series X?
When the Xbox Series X is turned on, in low power mode, or in standby, the fan is always on. The fan’s continuous rotation controls the console’s overall temperature. The Series X is kept from overheating, which may harm its internal parts, by an always-on fan.
You may read more about the Xbox Series X’s constant fan in the section below. This article also explains how the Series X controls temperature and provides advice on how to control the console’s fan if necessary.
Understand The Xbox Series X Fan
If the Xbox Series X is plugged into a power source while programs are active, the fan will continue to run. Even while the system is idle, parts like the solid-state drive (SSD) and the central processor unit (CPU) produce heat during games and updates.
How To Turn Off The Fan In The Xbox Series X?
There are two ways to switch off the Series X fan. The first step is to remove the box’s power source. The fan will stop when you unplug the console from the power source.
The second technique entails changing a few software options. You must perform the following actions in order to turn off the fan using the Xbox’s operating system:
- Open the Xbox Dashboard’s settings menu.
- Go to the Power Mode & Start-Up section after selecting the General option.
- Switch to Energy-Saving from Instant-On.
- When you press the power button, the system will turn off if Instant-On mode is disabled.
When you shut down the console, you can immediately pick up where you left off thanks to Instant-On, which keeps the system active in the background. When the console is in standby mode, Instant-On also enables the system to download updates. You completely shut down the machine and stop the fans from running by turning the mode off.
How The Xbox Series X Regulates Temperature?
When you use the Xbox Series X, heat will be produced. The metal chassis won’t be scorching hot, but it also won’t be ice cold either. When playing demanding games, the Series X operates cooler than the Xbox One X, which it replaces.
It’s amazing how the Series X avoids overheating when gaming with such potent internal parts.
The Xbox Wired journalist Will Tuttle claims that the Series X includes an axial fan that circulates air across the entire system. This was accomplished by the design team by cutting the motherboard in half and fastening one half to each side of the chassis, thereby forming an air tunnel that cools the inside components.
The Xbox’s cooling system is functioning properly if warm air can be felt coming out of the ventilation panel. The fan of the Series X draws cool air from the bottom of the console, pushes it upward through the hot internal components, and then forces it out through the top vents.
Therefore, even though the Series X can get warm while gaming, don’t worry—a little heat is quite natural.
Is The Xbox Series X Fan Loud?
On occasion, the vents on the console could make noise. How loud should your Xbox fan be, though, before it starts to worry you?
The Xbox Series X’s fan is intended to be extremely silent, so it shouldn’t be audible when you’re using it. The console is either malfunctioning or straining too hard to cool itself down if the fan is audible or louder than usual.
Your Series X fan may be overly noisy for the following reasons:
- The power cable inside the fan is unfastened.
- There is not enough ventilation for the console.
- The fan is getting covered in dust.
Loose Internal Power Cable
A loose connection in the fan’s power wire could result in a malfunctioning fan. You can take the console back to the store to have it mended by an authorized supplier in order to diagnose this problem. Alternately, you could decide to handle the home repair yourself.
In order to access the internals, you will need to remove the rear panel of the console box. To learn how to disassemble the Xbox, watch this Modded Warfare video:
Unplug and re-plug the fan’s cable after removing the panel. After that, the fan should resume operating quietly.
Insufficient Ventilation
Do you keep your Xbox confined to a tiny shelf or cabinet? The fan may be louder than usual if there is insufficient space for ventilation.
The Series X should have at least 4 to 6 inches (10 to 15.24 cm) of clearance on all sides, according to Xbox Support. Additionally, you shouldn’t set anything on top of the metal chassis. The fan will be able to circulate enough air through the system to maintain ideal temperatures if the console has adequate ventilation.
Dust
If you look into the vents and notice a layer of dust on the fan’s blades, it’s possible that the friction the dust particles are creating is making some noise. The fan needs to be dusted off in order to function quietly once more.
There are two typical methods for removing dust from the fans:
- Clean the fan’s blades by removing the back panel.
- By passing the nozzle of a can of pressurized air into the air vents, you may remove the dust.
What Would Happen If The Fan Did Not Run?
Your console will have trouble running your games if your fan stops functioning as a result of a defect. You can have performance issues when the system overheats, and finally the console will shut off. To stop further harm to the internal components, the console will shut down if it reaches a specified temperature.
Send your console in for repair right away if you suspect that the fan is not operating properly.
Wrapping Up
Because it is intended to protect the console from overheating while gaming and when there are background processes, the Xbox Series X is constantly on. The fan runs continuously when the system is in standby because components heat up during idle system upgrades.
By disconnecting the Series X from its power supply or putting the console in Energy-Saving mode, you can stop the fan from running continually. Otherwise, it is completely usual to leave the fan running all the time to keep the internal parts cold.